RESUMO
Due to the excellent properties of Ti (C,N)-based ceramics, such as high hardness, excellent wear resistance, exceptional thermal deformation resistance, and sound chemical stability, they have been widely used in cutting tools or molds. Thus, revealing their tribological behavior against hard materials is of great significance. Some studies have reported the tribological behavior of Ti(C,N)-based cermets and hard cermets, but so far, the effects of Mo2C additions on the frictional properties of Ti(C,N)-based cermets are still unclear. In this study, Ti(C,N)-10WC-1Cr3C2-5Co-10Ni-x Mo2C cermets (x = 4, 6, 8, 10 and 12 wt.%) were sintered using a vacuum hot-pressing furnace. Furthermore, the core-rim morphologies of the sintered samples were observed in SEM images. Then, the wear resistance of the cermets was studied against a Si3N4 ball at a 50 N load using the fretting wear test. Finally, the wear mechanism was characterized using a combination of SEM, EDS and XPS. The experimental results indicated that the wear mechanisms of the cermets were mainly abrasive wear, adhesive wear, and the formation of an oxide film. As the content of Mo2C increased from 4 wt.% to 12 wt.%, the friction coefficient and wear volume had a variation law of first decreasing and then decreasing, and reached minimum values at 6 wt.% and 12 wt.%, and the lowest friction coefficient and wear rate were 0.49 and 0.9 × 10-6 mm3/Nm, respectively. The 6 wt.% Mo2C greatly improved the hardness and fracture toughness of the cermet, while the 12 wt.% Mo2C promoted the formation of an oxide film and protected the friction surface. The cermet with 6 wt.% Mo2C is recommended because it has comprehensive advantages in terms of its mechanical properties, tribological properties, and cost.
RESUMO
The development of high-temperature structural materials, such as ceramics, is limited by their extremely high melting points and the difficulty in building complicated architectures. Four-dimensional (4D) printing helps enhance the geometrical flexibility of ceramics. However, ceramic 4D printing systems are limited by the separate processes for shape and material transformations, low accuracy of morphing systems, low resolution of ceramic structures, and their time-intensive nature. Here, a paradigm for a one-step shape/material transformation, high-2D/3D/4D-precision, high-efficiency, and scalable 4D additive-subtractive manufacturing of shape memory ceramics is developed. Original/reverse and global/local multimode shape memory capabilities are achieved using macroscale SiOC-based ceramic materials. The uniformly deposited Al2 O3 -rich layer on the printed SiOC-based ceramic lattice structures results in an unusually high flame ablation performance of the complex-shaped ceramics. The proposed framework is expected to broaden the applications of high-temperature structural materials in the aerospace, electronics, biomedical, and art fields.
